4 Mistakes Buyers Make When Buying Glass Inspection Equipment

Buying Glass Inspection Equipment

When it comes to the beverage industry, any defects in the packaging material can harm the consumer’s health and impact the reputation of the company. That is why beverage and food companies need to adopt stringent inspection procedures to ensure that the final product is free of any defects. In the early days, this procedure of inspection was done manually. 

But now, the Glass inspection equipment has taken up the role of identifying and inspecting the glass products by the use of vision inspection mechanism. It consists of a library of vision tools along with image acquisition and processing functionality.

There is a wide range of models available, so choosing the right model that will serve your purpose best becomes a daunting task. Before you look forward to using this system in your industry, you need to know the mistakes buyers make when buying a glass inspection machine. In this guide, we are going to tell the same.

Common mistakes buyers make when buying glass inspection equipment:

glass inspection equipment

1)      Buying the machine without doing any research: There are countless numbers of suppliers in the market, but not everyone maintains good standards. Many people buy the machine from the store that comes first in their way. Due to this, they end up by buying the wrong machine. Before you go ahead, you should always make sure that you are buying from a reliable store.

2)      Buying the machine without knowing the exact requirements: The components of glass inspection equipment vary with its functioning. Many manufacturers buy a glass inspection system without knowing why they need it. For instance, if you need to buy it to inspect the glass defects, then you should buy a machine with X-ray detection, but if you want to buy it for fill level inspection, then you should go for optic fill level inspection machine. Hence, it is crucial to know your need before finalizing your decision.

3)      Buying the machine without knowing the environmental conditions: This is the most common mistake buyers make while purchasing the equipment. For instance, lighting plays a critical role in any successful vision inspection system for measuring, sorting, grading, etc. If the light is insufficient, it becomes difficult to distinguish the defects from the background. Make sure that machine can generate appropriate light for its accurate operation on its own.

4)      Choosing the wrong optics: The minimum resolution required to detect the defects as tiny as 0.25 mm is within a vertical FOV of 20 mm. It is the viewing area of the camera and lens. These parameters indicate that a camera with a minimum of 320 ¥ 320-pixel sensor array must be used.

The concept of vision systems arrived on the market almost two decades ago. With the increasing number of manufacturers in the industry, it is not easy to decide which one to choose. We hope that this guide will help you to make the right purchase of glass inspection equipment and make the maximum profit from your manufacturing unit. Don’t forget to check out the services of FILTEC – on of the best supplier for inspection systems. 

For more information, explore the website here: https://www.filtec.com/