 |
| Buying Glass Inspection Equipment |
When it comes to the beverage
industry, any defects in the packaging material can harm the consumer’s health
and impact the reputation of the company. That is why beverage and food
companies need to adopt stringent inspection procedures to ensure that the
final product is free of any defects. In the early days, this procedure of
inspection was done manually.
But now, the Glass inspection equipment
has taken up the role of identifying and inspecting the glass products by the
use of vision inspection mechanism. It consists of a library of vision tools
along with image acquisition and processing functionality.
There is a wide range of models
available, so choosing the right model that will serve your purpose best
becomes a daunting task. Before you look forward to using this system in your
industry, you need to know the mistakes buyers make when buying a glass
inspection machine. In this guide, we are going to tell the same.
Common
mistakes buyers make when buying glass inspection equipment:
 |
| glass inspection equipment |
1)
Buying the machine without doing any research: There are countless
numbers of suppliers in the market, but not everyone maintains good standards.
Many people buy the machine from the store that comes first in their way. Due to
this, they end up by buying the wrong machine. Before you go ahead, you should
always make sure that you are buying from a reliable store.
2)
Buying the machine without knowing the exact requirements: The components of glass
inspection equipment vary with its functioning. Many manufacturers buy a
glass inspection system without knowing why they need it. For instance, if you
need to buy it to inspect the glass defects, then you should buy a machine with
X-ray detection, but if you want to buy it for fill level inspection, then you
should go for optic fill level inspection machine. Hence, it is crucial to know
your need before finalizing your decision.
3)
Buying the machine without knowing the environmental
conditions:
This is the most common mistake buyers make while purchasing the equipment. For
instance, lighting plays a critical role in any successful vision inspection
system for measuring, sorting, grading, etc. If the light is insufficient, it
becomes difficult to distinguish the defects from the background. Make sure
that machine can generate appropriate light for its accurate operation on its
own.
4)
Choosing the wrong optics: The minimum resolution required
to detect the defects as tiny as 0.25 mm is within a vertical FOV of 20 mm. It
is the viewing area of the camera and lens. These parameters indicate that a
camera with a minimum of 320 ¥ 320-pixel sensor array must be used.
The concept of vision systems
arrived on the market almost two decades ago. With the increasing number of
manufacturers in the industry, it is not easy to decide which one to choose. We
hope that this guide will help you to make the right purchase of glass inspection equipment and make the
maximum profit from your manufacturing unit. Don’t forget to check out the
services of FILTEC – on of the best supplier for inspection systems.
